Table of Contents
Advertisement
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals and set the
output signal of COMPONENT VIDEO OUT to the progressive format. For details, see "To set to
[PROGRESSIVE]" on page 67.
If your TV does not accept progressive signals and progressive format
is set by mistake
The image may not appear, or will appear distorted. In this case, return the setting to interlace format.
1
Press FUNCTION repeatedly until "DVD" appears in the front panel display.
2
While holding down ., press FUNCTION.
The output signal is changed to interlace format.
Output the TV or VCR sound from the speakers
1
Connect audio cords.
Connect the AUDIO OUT (L/R) jacks of TV or VCR to the VIDEO jacks (AUDIO IN L/R) of this system
with audio cords.
TV or VCR
*
AUDIO
OUT
L
R
* AUDIO OUT (L/R) jacks
If your TV does not have AUDIO OUT (L/R) jacks, you cannot output the TV sound from the speakers of this
system.
FUNCTION
.
AUDIO IN
SPEAKER
R
VIDEO
FRONT R
CENTER
FRONT L
WOOFER
SURR R
SURR L
WOOFER
SAT
R
AUDIO IN
Y
P
B
/C
B
P
R
/C
R
S VIDEO (DVD ONLY)
L
COMPONENT VIDEO OUT
L
MONITOR OUT
COAXIAL
AM
FM
75
VIDEO
continued
19
GB
Hide quick links:
Advertisement
Table of Contents
