Sony DAV-SB300 Operating Instructions Manual page 18

OUT
OUTPUT
AUDIO
OUT
R
VCR
Notes
• Make connections securely to prevent unwanted noise.
• Refer to the instructions supplied with the TV.
• The system cannot output an audio signal to the connected TV. Only the audio signal of the TV is output from the
system speakers.
To listen to the game machine (e.g., PlayStation 2) sound by using the
system
Connect the audio output jacks of the game machine to the SAT AUDIO IN (L/R) jacks of the system
with the audio cords (not supplied).
To change the color system (PAL or NTSC)*
* Asian, Australian, and Saudi Arabian models only.
Depending on the TV to be connected, you may be required to select either PAL or NTSC of the
system.
The initial setting of the system for Australian and Saudi Arabian models is PAL.
The initial setting of the system for Asian models is NTSC.
If the color system of the TV is PAL
To set the system to PAL from NTSC, turn on the system by pressing "/1 while pressing the PAUSE
button on the system. You need to hold the PAUSE button until the set powers on.
To reset to NTSC, turn off the system and then turn on again by pressing "/1 while pressing and
holding the PAUSE button on the system.
If the color system of the TV is NTSC
Do the same operation above to set the system to NTSC from PAL.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 66.
GB
18
OUT
OUTPUT
AUDIO
OUT
L L
R
Digital satellite
receiver
AUDIO IN
Y P
SPEAKER
R L
VIDEO
FRONT R CENTER FRONT L WOOFER
COMPONENT VIDEO OUT
SURR R SURR L WOOFER SAT
R L
AUDIO IN
IN
COMPONENT
VIDEO IN
Y
P /C
B B
P R /C R
TV with
COMPONENT
VIDEO IN jacks
/C P /C
B B R R S VIDEO (DVD ONLY)
VIDEO
MONITOR OUT
IN IN
INPUT INPUT
S VIDEO VIDEO
IN
TV with
S VIDEO jack
COAXIAL
AM FM 75
TV