Getting Started - Sony HT-M2 Operating Instructions Manual

Getting started

You can enjoy your audio/video equipment connected to the receiver by following the simple steps
below.
Before connecting cords, be sure to disconnect the AC power cord (mains lead).
Installing and connecting the speakers (page 12, 13)
Connecting the TV (page 14)
Connecting the video equipment (page 15)
Connecting the audio equipment (page 17)
Preparing the receiver
See "Setting the voltage selector" (page 19), "Connecting the AC power cord (mains lead)" (page 19) and
"Initializing the receiver" (page 19).
Setting the speakers
Select the surround speaker position (page 20), then check the speaker connection using "T. TONE" in
LEVEL menu (page 20). If the sound is not output correctly, check the speaker connection.
Setting the audio output settings on the connected equipment
To output multi channel digital audio, check the digital audio output setting on the connected equipment.
For a Sony Blu-ray Disc player, check that "Dolby Digital" and "DTS" are set to "Dolby Digital" and "DTS"
respectively (as of September 2011).
For a PlayStation 3, check that "BD Audio Output Format (Optical Digital)" is set to "Bitstream" (with
system software version 3.70).
For details, refer to the operating instructions supplied with the connected equipment.
11
GB