Table of Contents
Advertisement
Use the provided 2P terminal plug for signal wiring and plug into the PF+/- contacts.
Relay Output
Indication
Alarm Events:
Input power failure
Specific fiber port link down (To specify the fiber ports, use the DIP SW located on bottom.)
KSD-103-A
KSD-103-B
Note: Be sure the voltage applied on PF+/- contacts is within the specification of 30VDC/1A max. or
120VAC/0.5A max.
Normal PF+ and PF- contacts shorted
Alarm PF+ and PF- contacts open
SW1
ON
Enable broadcast storm protection
OFF
Disable broadcast storm protection
SW2
ON
Enable FX port link down alarm
OFF
Disable FX port link alarm
SW1
ON
Enable broadcast storm protection
OFF
Disable broadcast storm protection
SW2
ON
Enable FX1 port link down alarm
OFF
Disable FX1 port link alarm
SW3
ON
Enable FX2 port link down alarm
OFF
Disable FX2 port link alarm
15/20
Advertisement
Table of Contents
