Table of Contents
Advertisement
2. Installation
2.1 Unpacking
Check that the following components have been included:
Information CD
The device unit
DIN-rail mounting bracket
If any item is found missing or damaged, please contact your local reseller for replacement.
The following are available optional accessories:
Panel Mounting Bracket
The bracket is used for mounting the device on a panel surface.
Commercial-rated AC power adapters:
- Rated input AC120V/60Hz, AC230V/50Hz, AC100V/50-60Hz, AC240V/50Hz
- Rated output DC7.5V 1A, DC7.5V 1.2A
High temperature AC power adapters:
o
- Rated -10
C ~ 60
The adapters are used for supplying DC power to the switch via DC power jack interface.
2.2 Safety Cautions
To reduce the risk of bodily injury, electrical shock, fire, and damage to the product, observe the
following precautions.
Do not service any product except as explained in your system documentation.
Opening or removing covers may expose you to electrical shock.
Only a trained service technician should service components inside these compartments.
If any of the following conditions occur, unplug the product from the electrical outlet and replace
the part or contact your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
Do not push any objects into the openings of your system. Doing so can cause fire or electric shock
by shorting out interior components.
Operate the product only from the type of external power source indicated on the electrical ratings
o
C, AC100-240V/50-60Hz DC12V 1A for USA and Germany
10/20
Advertisement
Table of Contents
