Sony VPL-CX70 Operating Instructions Manual page 10

h Mouse-emulation keys
These keys function as the mouse
buttons of a computer only when the
projector is connected to a computer
using the USB cable.
For details, see "Controlling the
Computer Using the Supplied Remote
Commander (When Using the USB
Cable)" on page 22.
i ENTER key
j FUNCTION 1, 2, 3 keys
The FUNCTION 1 and 2 keys do not
work on this unit.
The auto focus function works when the
FUNCTION 3 key is pressed.
k Strap holder
For attaching a strap.
l RESET/ESCAPE key
Functions as a RESET key.
Resets the value of an item to its factory
preset value or returns the enlarged
image to its original size. This key
functions when the menu or a setting
item is displayed on the screen.
m D ZOOM (Digital Zoom) +/– key
Enlarges the image at a desired location
on the screen.
n
M / m / < / ,
o MENU/TAB key
Functions as a MENU key.
p APA (Auto Pixel Alignment) key
Automatically adjusts a picture to its
clearest while a signal is input from a
computer.
For details, see "Smart APA" in "The
SET SETTING Menu" on page 29.
q VOLUME +/– keys
r LENS key
Each time you press this key, the Focus
adjustment and Zoom adjustment menus
are displayed alternately.
10
Location and Function of Controls
keys (Arrow)
s PJ NETWORK (Projector/
Network) selector switch
Normally, set to "PJ."
t COMMAND ON/OFF switch
When this switch is set to OFF, the keys
on the Remote Commander do not
function. This saves battery power.
u Infrared transmitter
To install batteries
1
Push and slide the lid to open it, then
install the two size AA (R6) batteries
(supplied) with the correct polarity.
While pressing the lid, slide it.
Be sure to install the battery from
#
the side.
2
Replace the lid.