Sony VPL-CS6 Operating Instructions Manual page 28

4
The setting for security lock is completed.
5
Turn the main power off and disconnect the AC power cord.
The security lock is set to on, then it becomes effective. The screen for entering
the password is displayed when the power is turned on the next time.
Notes
• You will not be able to use the projector if you forget your password and the password
administrator is not available. Be please aware that using the security lock can prevent
valid usage in such cases. It is recommended that you make a note of the selected
password.
• If you fail to enter the correct password after three tries, the projector cannot be used.
In this case, press the I / 1 key to turn off the power.
• The security lock will not be set if the correct password is not entered in steps 2 and
3, or a key other than the MENU, arrow keys (M/m/</,), and ENTER key is
pressed.
• If you call the customer service center because you have forgotten the password, you
will need to be able to verify the projector's serial number and your identity. (This
process may differ in other countries.) Once your identity has been confirmed, we
will provide you with the password.
28
GB
Projecting
INSTALL SETTING
T i l t . . .
V Key s t o n e : Au t o . . .
I m ag e F l i p : O f f
B a ck g ro u n d : B l u e
L a m p M o d e : S t a n d a rd
High Altitude Mode: O f f
S e c u r i t y L o ck : O n
S e c u r i t y L o ck e n a bl e d !
X Input A