Sony VPL-CS6 Operating Instructions Manual page 19

To connect an IBM PC/AT compatible computer
Left side
POWER
SAVING
INPUT A
MENU
PUSH
PRO
ENTER
AUDIO VIDEO S VIDEO
ACCESS
TEMP/FAN
LAMP/COVER
Stereo audio connecting cable (not supplied)
USB cable (supplied only VPL-CS6/CX6)
(Connect the USB cable to use a wireless
mouse or the Projector Station.)
a) Use a no-resistance cable.
On the USB function
When connecting the projector to a computer by using the USB cable for the
first time, the computer recognizes the following devices automatically.
1 USB hub (general use) (VPL-CX6 only)
2 USB human interface device (wireless mouse function)
3 USB human interface device (projector control function) (VPL-CX6 only)
Recommended operating environment
When you use the USB function, connect the USB cable as illustrated above.
This application software and the USB function can be used on a computer
loaded with Windows 98, Windows 98 SE, Windows ME, Windows 2000 or
Windows XP preinstall models.
Notes
• Your computer may not start correctly when connected to the projector via the USB
cable. In this case, disconnect the USB cable, restart the computer, then connect the
computer to the projector using the USB cable.
• This projector is not guaranteed for suspend, standby mode. When you use the
projector in suspend, standby mode, disconnect the projector from the USB port on
the computer.
• An optional Remote Commander and USB cable are required when controlling the
mouse of the computer from the VPL-EX1.
• Operations are not guaranteed for all the recommended computer environments.
HD D-sub 15-pin cable
(supplied)
a)
to USB connector
Computer
to monitor output
to audio output
Connecting the Projector
19
GB