Troubleshooting - Sony KV-32FX66K Instruction Manual

Troubleshooting

Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark)
and no sound.
Poor or no picture (screen is
dark), but good sound.
No picture or no menu
information from equipment
connected to the Scart
connector.
Good picture, no sound.
No colour on colour
programmes.
When you switch on the TV
the last channel you were
watching before switching
the TV off does not appear.
Distorted picture when
changing programmes or
selecting teletext.
Distorted picture when
pressing the Remote Control
Locator button.
Wrong characters appear
when viewing teletext.
Wrong characters appear
when viewing NexTView.
Solution
• Check the aerial connection.
• Plug the TV in and press the
• If the standby indicator
the remote control.
• Using the menu system, select the "Picture Adjustment"
menu and select "Reset" to return to the factory settings.
• Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
• Press the + button on the remote control.
• Check that "TV Speakers" is "On" in the "Sound Adjustment"
menu.
• Check that headphones are not connected.
• Using the menu system, select the "Picture Adjustment"
menu and select "Reset" to return to factory settings.
• This is not a malfunction. Press the number buttons on the
remote control to select the desired channel.
• Turn off any equipment connected to the Scart connector on
the rear of the TV.
• This is not a malfunction. It could be caused because some
broadcast TV uses the same frequency or a frequency close to
that of the remote control locator. This problem will disappear
when you stop pressing the button.
• Use the menu systemto enter the "Language/Country" menu
and select the country in which you operate the TV set. For
Cyrillic languages, we recommend to select Russia country in
the case that your own country does not appear in the list.
• Use the menu systemto enter the "Language/Country" menu
(see page 14) and select the same language that NexTView is
broadcast in.
button on the front of the TV.
is on, press TV button on
Additional Information
GB
continued...
25