Troubleshooting - Sony FD Trinitron WEGA KV-36FV15 Operating Instructions Manual

Hide thumbs Also See for FD Trinitron WEGA KV-36FV15:
Table of Contents

Advertisement

Troubleshooting
Consult
the table below;
it suggests
solutions
to specific
problems.
You want to restore
the TV's
factory
settings
A red light keeps flashing
on the
TV for more than a few seconds
TV makes a noise when turned
on
Screen is not lit and there is no
sound
• Your TV may need service.
• This is a normal function
of your TV.
• Power cord may not be plugged
in.
• Remote control batteries
may not be inserted
correctly.
• TV/VIDEO
setting may be incorrect.
• Current
program
may exceed PARENTAL
CONTROL
settings.
• First, turn the TV on. Then while pressing
the RESET
button on the remote control, press the POWER button
on the TV. The TV will turn itself off and then back on.
When the TV turns on again, all settings will be reset, and
the initial setup screen will appear.
• Call your local Sony service center.
• Check your power
cord.
• Re-insert the batteries
in your remote control.
• Press TV/VIDEO
until you receive a channel.
• Check your PARENTAL
CONTROL
settings,
(page 28).
Poor or no picture
(screen
lit),
• VIDEO menu settings
may not be adjusted
correctly.
' • Readjust
your VIDEO menu settings, (page 19).
good sound
• Antenna/cable
connections
may be faulty.
• Check your VIDEO LABEL settings,
(page 22).
• VIDEO LABEL inputs may be set to WEB. (This
label darkens
the screen for ideal WebTV viewing)
Good picture,
no sound
• Sound may be set to MUTING.
• Press MUTING.
• Your TV may be set to SAP.
• Check the MTS setting in the AUDIO menu, (page 20).
• SPEAKER may not be set correctly.
• Check your SPEAKER settings, (page 20).
No color
• Color settings may not be adjusted correctly.
• Adjust the COLOR settings in the VIDEO menu, (page 19).
Only snow and noise appear on
• CABLE may not be set correctly in the CHANNEL
• Ensure that you have selected the correct CABLE mode in
the screen
SET UP menu.
the CHANNEL
SET UP menu, (page 23).
• Antenna/cable
connections
may not be correct.
• Press ANT on your remote control
to change
the input
• TV may be set to AUX mode.
mode,
(page 15).
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents