Hitachi NES1-OP Basic Manual page 4

Supplement of Cautions for UL and cUL
Note (* mark) of item j): When a breaker is used in NES1-002L/004L/007L, a breaker of 15A and a protector (breaker) of 5A in series is additionally
required by the NEC(National Electrical code) standard un US.
1.1 Inspection at unpacking
Please check the followings after unpacking.
Please contact Hitachi if there are any problems such as noted below on the product.
(1) Any damage during transportation?
(2) Basic manual (English and Japanese) are packed together with the product?
(3) The product is the one you ordered (check with the specification label)
Model name
(NES1-002SB example)
Freq.
Voltage
Input
Phase
Current
Freq.
Output
Volt. & phase
Current
Manufacturing number
1.2 Basic Manual (This document)
This Basic manual is for NE-S1 series inverters.
Read this manual carefully for the proper operation of the product. Please keep this manual for future usage.
Please refer to QRG for the further detailed information. QRG can be downloaded from our website.
HP address: http://www.hitachi-ies.co.jp/english/products/inv/nes1/index.htm
When you use any options, please refer to the manual of each option.
1.3 In case of contact
When contacting the store or vendor where you bought the product or Hitachi directly, please provide the following information.
(1) Model name of the inverter
(2) Manufacturing number
(3) When you bought the product
(4) Contents of your inquiry
- Damaged portion and condition, and else
1.4 Warranty Terms
The warranty period under normal installation and handling conditions shall be two (2) years from the date of manufacture, or one (1) year from the
date of installation, whichever occurs first. The warranty shall cover the repair or replacement, at Hitachi's sole discretion, of ONLY the inverter that
was installed.
1. Service in the following cases, even within the warranty period, shall be charged to the purchaser:
a. Malfunction or damage caused by mis-operation or modification or improper repair
b. Malfunction or damage caused by a drop after purchase and transportation
c. Malfunction or damage caused by fire, earthquake, flood, lightening, abnormal input voltage, contamination, or other natural disasters
2. When service is required for the product at your work site, all expenses associated with field repair shall be charged to the purchaser.
3. Always keep this manual handy; please do not lose it. Please contact your Hitachi distributor to purchase replacement or additional manuals.
-002SB
200-240
200-240
2616200716000001
Example of the specification label
4
Specification label
3.1
1.4
1206
-001