Assembly Of Actuator Onto Bay Or Outward Opening Window - Master FORCE 300 N Instruction Manual

Table of Contents

Advertisement

14.4. Assembly of actuator onto bay or outward opening window.

Aside the drawing of specific application using
accessories provided. For different mountings, please
contact manufacturer.
A.
Pencil in an "X" over the centre line of the window frame
(fig. 12).
B.
Select the correct form of brackets (fig. 13).
C.
Fold the template along the green dotted line and keep
in position at 90°. Attach one part to the window frame
(fixed part), taking care to line up the axis with the "X"
previously pencilled in on the central line and line the
folded part up against the moveable part of the frame.
Warning: as various different applications are possible,
place the actuator in a central position and adjust the
positions of the brackets, taking care to keep the
actuator aligned with the window section.
D.
Bore holes into the window frame at the points indicated
(fig. 14).
E.
Mount the bracket for outward opening windows onto the
moveable part of the frame in accordance with the
markings indicated on the template.
F.
Complete assembly of the chain terminal with the safety
clip inserted onto the provided pin Ø4x32 in median
position (see fig. 15).
G.
Mount the two brackets on to the sides of the actuator.
H.
Position the actuator onto the window frame and line up
with the holes bored earlier. Fix the actuator.
I.
Bring the chain terminal up to the bracket and insert the
pin into the hole on the bracket. Attach the safety clip to
the bracket.
J.
Check that the exit of the chain is perfectly aligned with
the bracket. If the chain is not aligned, loosen the fixing
screws and reposition the bracket correctly.
K.
Check all electrical connections with the diagram on the
label attached to the lead and in conformity to
indications on chapter 9 – Electrical connection.
L.
Carry out a complete check of opening and closure of the
window. Once the closure phase has been completed,
check that the window frame is completely closed by
checking the pressure on the weather strips.
Page 16
Vertical assembly on outward
Figure 12
Figure 13
Figure 14
Figure 15
opening

Advertisement

Table of Contents
loading

This manual is also suitable for:

1120.8

Table of Contents