Table of Contents
Advertisement
Battery Management Studio
Reading Control Subcommands. Chemical ID() (0x0008) via ManufacturerAccess()
•
Send Chemical ID() to ManufacturerAccess()
– Start Register = 0x00
– Bytes to Write = 08 00
– Press the Write button
– Start Register = 0x00
– Number of Bytes to Read = 2
– Press the Read button
– Date returned =07 01, which a byte swapped
– That is 0x0107, chem ID 107
14
bq34z100EVM Wide Range Impedance Track™ Enabled Battery Fuel Gauge
Solution
Copyright © 2021 Texas Instruments Incorporated
SLUU904B – APRIL 2012 – REVISED APRIL 2021
Submit Document Feedback
www.ti.com
Advertisement
Table of Contents
