Table of Contents
Advertisement
www.ti.com
3.5 Programming Screen
Press the Programming button to select the Programming Update window. This window allows the user to
program the device to a new version of firmware.
3.5.1 Programming the Flash Memory
The upper section of the Programming screen is used to initialize the device by loading the default .srec into the
flash memory (see
Figure
•
Search for the .srec file using the Browse button.
•
Press the Program button and wait for the download to complete.
•
Press the Execute FW button after the download has completed.
•
Select File | Restart to initialize bqStudio to the new firmware.
SLUU904B – APRIL 2012 – REVISED APRIL 2021
Submit Document Feedback
Figure 3-5. Programming Screen
3-5).
Copyright © 2021 Texas Instruments Incorporated
bq34z100EVM Wide Range Impedance Track™ Enabled Battery Fuel Gauge
Battery Management Studio
11
Solution
Advertisement
Table of Contents
