Table of Contents
Advertisement
HEATING
Open the door and place food in the oven cavity. Close the door. "0" must be showing in the dlsptay window.
A. Manual Single Stage Heating:
This feature gives the user maximum tlexibility to set the oven to desired heating time and power level.
ldeal for menus that require various heating requirements.
Example: To heat for 2 minutes at High Power
Oisplav Window
z. [E:rT]--l tE-.:.-Il--] EJT,t-l
.Press the Power Level Selector
Pad one iime.
.Press the Memory Pads 2, 0 and 0.
.Press the START Pad.
Heating will start.
The time on digital display will
count down.
.All heating will stop.
When opening the door, the
display will stop blinking.
4. Beep tone will sound.
B. Manual 2 or 3 Stage Heating:
This feature allows you to set to begin heating at one power level then shitt automatically to a difierent
power level atter the designated amount of heating time.
Example: To heat for 2 minutes at Oefrost Power tor 2nd stage heating
For Stage 1 cooking
1. Follow steps 1 and 2 above.
For Stage 2 cooking
Displav Windon,
'.fffi)
ulvEy
ErrT;-l ttrrTr-l til.:-, fl,]
@
NOTE:
witt stop btinking.
For a 3 stage heating cycle, selecl a power level again and set the cooking time (steps 1 and 2 above).
SPECIAL NOTE: For both single and 2 or 3 stage heating.
1. While heating, one touch on the STOP/RESET Pad stops the oven. You can restart by pressing the START
Pad or a second touch on the STOP/RESET Pad will cancel the selected program.
2. One touch on the STOP/RESET Pad, betore the heating cycle is started, will cancel the selected program.
3. r---t
ttt^"J
2.
.Press the Power Level Selector
Pad 3 times. Indicator will change
each time the pad is pressed. DEF
is now displayed. Stage 2 is
blinking.
.Press the Memory Pads 2, 0 and 0.
.Press the START Pad.
The total time tor both stages will be
displayed. The Active Stage "1' and
the Power Level "Hl" blinks. The oven
Iamp will be tumed on. Heating will
start.
.The total time will display and count
down.
.When oven shitts to the next stage, a
single beep tone will sound. The
Active Stage "2" and the Power Level
"DEF'blink.
.All heating will stop.
When opening the door, the display
4. Beep tone will sound.
(See page 16)
- 9 -
Advertisement
Table of Contents
