Table of Contents
Advertisement
Programming
_ DO NOT OPEN THE DOOB -
The display window MUST be blank betore programming can begin. lf any indicator light is
illuminated in the digital Display Window: close the door, press STOP/RESET Pad and
wait 1 minute unlil the Display goes blank.
' @
6-0m
uIl,
F.-.:-el
@
4.
.Press the PROG Pad.
NOTE:
.ll no PROG Indicator appeared
on display, "Program Lock' should
be cancelled. (See page 14.)
.Do not keep pressing PROG Pad
for more than 30 seconds, or a
false failure code may result.
.Press the Memory Pad 5.
The pad number and the previously
selected time and power level will
appear in the display.
.The pad number and Stage
Heating Indicator will appear
in the display again.
.Press the Power Level Selector
Pad 2 times. The Memory Pad
display will go out.
.Press Memory Pads 3 and 0.
.Press the PROG Pad again. You
have completed programming
the selected Memory Pad for
single stage heating and double
heating time for multiple portion
heating automatically.
.2 seconds later, the time and
power level setting tor single
stage will appear in the display.
.2 seconds later, Double Quantity
Heating Indicator and then the
double heating time will appear
in the display.
.2 seconds later, the display
will go blank.
Memory Pad 5 is now programmed
for heating - 30 seconds at MED Power
T=---=---'-=-l
I
? n n
I
t u u
---#
t _ l
A. Programming Memory Pads for Single Stage Heating:
Example: To program 30 seconds at Medium Power tor Memory Pad Number 5
Displsv Window
l
t
i
l
Disolav Window
="---=--_
i
2.H-n.Tl_]
\ - - - - - - - - - - - - - -
- 1 1 -
Advertisement
Table of Contents
