Canon PowerShot A10 User Manual page 97

4
Pull the battery out of the
holder, as shown.
1
5
Insert the new date battery
into the holder, with the
negative terminal (–) facing
up.
6
Replace the date battery
holder back into its original
position, and close the CF
card slot cover.
2
Negative terminal ( )
7
When the LCD monitor will
display the Set Date/Time
menu, proceed to set the
current date and time
( p. 24).
The LCD monitor also displays the Set Date/
Time menu the very first time you turn on the
camera. This is normal, and does not mean
that the date battery is depleted.
If you should dispose of your
camera, first remove the button
battery for recycling according
to the recycling system of your
country.
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggoolen
maar inleveren als KCA
95