Canon PowerShot A10 User Manual page 112

Image too large
Incompatible
JPEG format
Corrupted data
RAW
Unidentified image You attempted to replay an image file recorded in a unrecognized format (file
Cannot magnify!
Cannot rotate!
Protected!
Too many marks!
E xx
110
You attempted to replay an image whose file size was too large or whose
resolution exceeded 3200
You attempted to replay an incompatible JPEG file.
You attempted to replay an image with corrupted data.
You attempted to replay a RAW image.
recorded by a different camera in a proprietary format, etc.).
The image you attempted to magnify was recorded by another camera, or
recorded in a format that cannot be magnified, or edited on a computer.
The image you attempted to rotate was recorded by another camera, or
recorded in a format that cannot be rotated, or edited on a computer.
You attempted to erase a protected image.
Too many images have been marked for printing. Cannot process any more.
Camera malfunction (where xx is the two-digit error code). Try turning the
camera off and back on. If this message recurs frequently, note down the error
and call a Canon Customer Support Help Desk. If this message appears
immediately after you have taken a shot, it is possible that the camera failed to
record the image—so you may want to switch into Replay mode to check
whether the image was actually recorded.
2400 pixels.