Information Displayed On The Lcd Monitor - Canon PowerShot A10 User Manual

Information Displayed on the LCD Monitor

Shooting Mode
Shooting information appears on the LCD
monitor for approximately 6 seconds when
you take any of the following actions. With
one exception, this information appears
even if the monitor is turned off.
• The power is turned on.
• The , ,
pressed.
• The camera settings are changed.
• The Setup menu is closed.
• The shutter button has been pressed
and a shot has been taken (LCD
monitor must be on).
32
/ or / button is
Remaining Image
Capacity
The following information appears on the
LCD monitor.
Shooting Mode
Exposure Compensation
White Balance
Compression
Resolution
Flash
Shooting Method
Macro/Infinity
A10
Zoom
Settings*
A20
Camera Blur Warning
If you wish to select the flash mode, select
macro or infinity mode, select the self-
timer, or select continuous shooting, the
information shown in gray above must be
visible on the monitor. If this information is
p. 37
... ... p. 46
p. 47
p. 37
p. 37
p. 39
p. 45
p. 42
3.8 4.8 6.0
p. 36
3.8 4.7 6.0 7.5
p. 31