Digital Zoom Function; Image Stabilizer Function - Panasonic Palmcorder PV-GS59 Operating Instructions Manual

Digital Zoom Function

This function is useful when you want to record
close-up shots of subjects located beyond a
normal zoom range of 1× to 30× magnification.
With the Digital Zoom Function, you can select a
magnification from 50× up to 1000×.
• Set to Tape Recording Mode.
1
Set [ ADVANCED] >> [
[50×] or [1000×].
OFF Optical zoom only (Up to 30×)
50× Digital zooming to 50×
1000× Digital zooming to 1000×
2
Push the [W/T] Lever towards [W] or
towards [T] to zoom in or out.
To Cancel the Digital Zoom Function
Set [ ADVANCED] >> [
Notes:
• The larger the digital zoom magnification, the more
the image quality is degraded.
• When the Card Recording mode is used, the Digital
Zoom Function cannot be used.
• White Balance cannot be set in the Digital Zoom
range.
About the Variable Speed Zoom
Function
• When pushing the [W/T] Lever as far as it will go,
you can zoom from 1× to 30× in 3.3 seconds at the
maximum in the Recording Mode.
• The zoom speed varies according to the amount of
movement of the [W/T] Lever.
• The Variable Speed Zoom Function cannot be
used with the Remote Control. (PV-GS59 Only)
36
D.ZOOM] >>
S P 3 h 5 9 m 5 9 s 2 9 f
3 5 X w T
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 6 1 0 0
D.ZOOM] >> [OFF].

Image Stabilizer Function

If the Camcorder is shaken while recording, the
camera shake in the image can be corrected.
• If the Camcorder shakes too much, the images
may not be stabilized.
• Set to Tape Recording Mode.
1
Set [ ADVANCED] >> [
• The [ ] Indication appears.
S P
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 6
2
Press the Recording Start/Stop Button or
[PHOTO SHOT] Button to start recording.
To Cancel the Image Stabilizer
Function
Set [ ADVANCED] >> [
Notes:
• When the MagicPix Function is used, the image
stabilizer function does not work. If so, the [
indication flashes.
• When the Gain Up mode is set to ON, the image
stabilizer function does not work. If so, the [
indication flashes.
• Under fluorescent lighting, image brightness may
change or colors may not look natural.
• After-images may appear.
• When a tripod is used, we recommend that you
turn the Image Stabilizer off.
• In the following cases, the Image Stabilizer
Function may not work effectively.
- When the digital zoom is used
- When a conversion lens is used
- When recording is done in an extremely dark
place
- When the Camcorder is shaken greatly
- When you record a moving subject while tracking
it
EIS] >> [ON].
3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
1 0 0
EIS] >> [OFF].
]
]