Dpof Setting; This Is For Writing The Printing Data On - Panasonic SDR-S100 Operating Instructions Manual

DPOF setting

This is for writing the printing data on an SD card.
You can write the data of pictures to be printed, number of copies, and other
information (DPOF data) onto the SD card.
¬ Rotate the mode dial to select
1
PLAY SETUP
PLAY MODE
LOCK
DPOF SET
SETUP
2
DPOF SET
SETUP
3
DPOF SET
SETUP
To complete the settings
Press the [MENU] button.
To return the total number of pictures to [0]
PLAY SETUP
PLAY MODE
LOCK
DPOF SET
SETUP
66
VQT0T50
NO
SET
CANCEL ALL
ENTER EXIT MENU
0
ENTER
2
ENTER
NO
SET
CANCEL ALL
EXIT
ENTER MENU
.
Press the menu button, then use the
cursor button to select
[ PLAY SETUP]
[SET]. (P26)
Press the cursor button up, down, left
or right to select a scene to be set,
then press the button in the center.
The number of prints set to be in DPOF is
displayed.
Press the cursor button up or down to
select the number of prints, then
press the button in the center.
≥ You can select from 0 to 999. (Selected
number of pictures can be printed as you set
the number of prints with the printer
supporting DPOF.)
≥ The function can be cancelled by setting the
number of pictures to [0].
Press the menu button, then use the
cursor button to select
[ PLAY SETUP]#[
[CANCEL ALL]. (P26)
≥ When the confirmation message appears, use
the cursor button to select [YES], then press
the button in the center.
#
[ DPOF SET]
DPOF SET]#
#