Inserting/Removing An Sd Card; Vqt3E42 - Panasonic SDR-H100K Owner's Manual

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l 76) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD card or built-in memory, the access lamp lights up.
1
Open the LCD monitor.
2
Open the SD card cover and insert (remove) the SD card into (from)
the card slot.
≥ Face the label side B in the direction shown in the illustration and press it straight in as far
as it will go.
≥ Press the center of the SD card and then pull it straight out.
3
Securely close the SD card cover.
≥ Do not touch the terminals on the back of the SD card.
≥ See page 113 for details on handling the SD card.
24

VQT3E42