Installation - Kohler Mira Sport Thermostatic 9.0 Installation And User Manual

Installation

Warning! Turn off the electrical and water supplies before proceeding with
the installation of the shower.
1
Remove the three screws that
hold the cover on and remove
the cover.
Remove the service tunnel.
2
Using the installation template
3
supplied, mark the positions
of the three fixing holes.
Note: Ensure that there are
sufficient lengths of supply pipe
and electrical cable to reach the
connection points.
Remove the installation template
4
and drill three holes to suit the
fixing screws and wall plugs.
Caution! Do not drill into cables
or pipes in the wall.
Service
Tunnel
Cover
Caution! Do not drill into
buried cables or pipes.
13
Screws
Screw
1494247-W2-A