Daily Use - Zanussi ZVT860X User Manual

9
10
Heat setting displays
Display
-
Residual heat indicator

Daily use

Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you acti-
vate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). Remove the object or
clean the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates.
See below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
- — 6 hours
•
- — 5 hours
•
— 4 hours
www.zanussi.com
sensor field
The cooking zone is deactivated.
The cooking zone operates.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
).
To select a cooking zone.
To activate and deactivate the outer ring.
Description
Warning!
residual heat!
•
- — 1.5 hours
The heat setting
Touch to increase the heat setting. Touch
to decrease the heat setting. The display
shows the heat setting. Touch
same time to deactivate the cooking zone.
Activation and deactivation of the outer
rings
You can adjust the surface you cook to the di-
mension of the cookware.
To activate the outer ring touch the sensor field
/ . The indicator comes on.
Do the procedure again to deactivate the outer
ring. The indicator goes out.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat
setting for some time (see the diagram), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function the
cooking zone must be cold (no
play). Touch of the cooking zone again and
function
The risk of burns from
and
in the dis-
at the
19