Table of Contents
Advertisement
Auto speaker setup
Auto speaker setup allows you to achieve a satisfactory listening environment easily with the use of the supplied calibration microphone
as a detector of sound signals. The unit will first perform automatic speaker detection, then checks and adjusts the following settings.
DETECTION
DISTANCE
FREQUENCY
LEVEL
Loud test tones are output from the speakers during setup, so keep children out of the room.
Before setup
Conduct the auto speaker setup in a quiet environment. A noisy background will give unsatisfactory results.
Process for auto speaker setup
Turn on the unit.
Connect the calibration
microphone to the
[SETUP MIC] jack on
the front panel.
Placing of calibration
microphone.
•
Checks which speakers you have connected.
•
Checks the distance of each speaker from the listening position and adjusts the
timing of each channel automatically.
•
Makes any further corrections to the frequency response.
•
Checks and adjusts each speaker level automatically.
Press
.
•
The standby indicator goes off when you turn on the unit.
Note
The calibration microphone is sensitive to
heat. Keep it away from direct sunlight and
do not place it on top of the unit.
Calibration microphone
•
Place on a flat surface at the seating area.
•
Set calibration microphone position at
your ear height.
•
Turn off all components before making any connections.
•
Peripheral equipment and cables sold separately
unless otherwise indicated.
•
To connect equipment, refer to the appropriate
operating instructions.
(included)
11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
