Baseplate Connections; Display Configurations - AMD FirePro W600 User Manual

Table of Contents

If you have properly installed your graphics card, operating system messages will

appear and the boot procedure will proceed.

Your monitor will be running in a basic (VGA) video mode. Higher refresh rates are

not available at this stage of the installation. Once you have installed the AMD FirePro

drivers and software, you can use the Windows®Display Properties dialog to adjust

your video settings and configure multiple monitors.

Proceed to install the software and drivers for your AMD FirePro graphics card.

2.2 Baseplate Connections

The following figures show the display connections available on your graphics card.

Note: Baseplate may not appear exactly as depicted.

Figure 2–2 AMD FirePro W600 Baseplate Connections

Mini-DisplayPort

The following table lists options for attaching displays that are indirectly supported by

the connections on your graphics card.

For best graphics performance and quality, always use native connections, when

available.

Note: Adapters not provided with your graphics card can be purchased directly from

AMD's Web site or through your local AMD resellers.

Hardware Installation 7

AMD FirePro W600

Table of Contents