Steam Functions - LG DT22BSSG Owner's Manual

42
HOW TO USE
Special Functions. (cont.)
* control lock
Use this option to prevent unwanted use of the dryer
or to keep cycle settings from being changed while the
dryer is operating.
Press and hold the button marked Control Lock for
3 seconds to activate or deactivate the Control Lock
function. The Control Lock icon will be shown in the
display, and all controls will be disabled except the
POWER button.
NOTE
Once set, Control Lock remains active until it is
manually deactivated. Control Lock must be turned
off to run another cycle. To deactivate Control Lock,
press and hold the Control Lock button for 3 seconds.
energy saver
This option helps to reduce the energy consumption in
the Normal cycle, depending on the load size.
The drying time will be changed when the Energy Saver
option is selected.
NOTE
The Energy Saver option is turned on by default in the
Normal cycle.
For faster drying in the Normal cycle, turn off the
Energy Saver option.
* default on/off
This option allows the Energy Saver settings to be
changed. To run a Normal cycle without the Energy
Saver option, press and hold the Energy Saver button for
three seconds. ON or OFF appears in the display.

Steam Functions

LG's new steam technology allows you to inject fabrics
with a swirling jet of hot steam to refresh clothes, reduce
static, and make ironing easier.
Simply select the Steam Fresh™ cycle, or you can add a
steam option to selected cycles.
Using the steam fresh™ cycle
Steam Fresh™ uses the power of steam alone to quickly
reduce wrinkles and odor in fabrics. It brings new life to
wrinkled clothes that have been stored for an extended
time and makes heavily wrinkled clothes easier to iron.
Steam Fresh™ can also be used to help reduce odors in
fabrics.
Using the Wrinkle free cycle
Use to remove wrinkles, including from loads left in the
dryer too long. This is helpful in preventing wrinkles
when you are unable to remove items from the dryer
immediately.
NOTE
• If you will be on vacation or not using your dryer
for an extended period of time, you should turn off
the water supply to the dryer. This helps to avoid
unintended flooding (due to a water pressure surge)
while you are away.