Epson STYLUS PHOTO 1290 Setup Manual page 8

4. Select Install Printer Driver/Utility, and
click
that appears to start the printer software
installation. If Problem Solver is available
in your location, it is automatically
installed on your hard drive.
Note:
❏ It is possible to install the Reference Guide
❏ The Problem Solver provides tips and instructions to help you solve most
5. Follow the on-screen instructions to turn on your printer.
For Windows Me and 98 users, the printer port configuration starts
automatically.
For printers connected via the USB cable, the USB device driver
installation starts automatically at this point. When a message appears
asking you to restart your computer, do so.
6. After turning on the printer, the Setup
utility opens automatically.
Follow the on-screen instructions to install
the ink cartridges, check the print head
nozzles, and clean the print head. When a
message appears informing you that the
setup is complete, click OK.
Note:
If the Setup utility does not start, proceed to section
cartridges using the printer's control panel.
Downloaded from:
. Then, click OK in the dialog box
on your hard drive from the Installer
dialog box, as shown on the right. To
install the guide, click Online Guide
. Then, click Install Reference Guide and follow the on-
and then
screen instructions. When the installation is complete, an ESP 1290
Guide icon appears in the EPSON folder. Double-click the icon to open
the guide.
problems that you may encounter when printing. The Problem Solver can
be accessed through the EPSON folder, Status Monitor 3, or the printer
software. For details, see the "Troubleshooting" section of your Daily Use
guide.
http://www.usersmanualguide.com/
to install the ink