Epson STYLUS PHOTO 1290 Setup Manual page 4

Hold the paper support adapter so that the arrows on the adapter are
toward the front of the printer, and insert the adapter into the slot at the
rear of the printer.
Insert the roll paper holder into the slots at the back of the paper support
adapter, then insert the paper support into the slot at the rear of the paper
support adapter.
Note:
At this time you may mount the roll paper holder temporarily, by inserting it into
any slots at the rear of the paper support adapter. You do not need to actually mount
the roll paper.
➀
➂
Downloaded from:
Attaching the Printer Parts
http://www.usersmanualguide.com/
➁
➃