Epson STYLUS PHOTO 1290 Setup Manual page 12

1. Lower the output tray and open the
printer cover.
2. Turn on the printer by
pressing the P power
button.
The print head moves to
the left, which is the ink
cartridge installation
position. The P power
light flashes and the error
light comes on.
c
3. Push back the release tabs and lift up the ink
cartridge clamps.
4. Open the ink cartridge
packages. Next, remove only
the yellow tape seals from
each cartridge.
Downloaded from:
Caution:
Do not move the print head by hand. Doing so may damage the printer.
http://www.usersmanualguide.com/