Other Functions; I Tuning Step; I Exiting Set Mode - Icom ID-800H Firmware Update

Vhf/uhf digital transceiver

Hide thumbs Also See for ID-800H:

Table of Contents

A "6.25 kHz" tuning step is additionally available with the

ﬁrmware update. The "6.25 kHz" tuning step can be used for

all bands, except the 900 MHz band.

Also, the set mode indication is also modiﬁed as follows.

NOTE: During the "6.25 kHz" tuning step selection, the op-

erating frequency indication below 1 kHz, 0.25 kHz and

0.75 kHz indications, won't be displayed on the function

display.

Indication example;

When 145.03125 MHz

is set.

OTHER FUNCTIONS

[

The key operation to exit from each set mode, "SET,"

"CALLS" and "MESSAG," has been changed as follows.

"SET"

"CALLS"

"MESSAG" : Push [M/CALL•PRIO], [TONE•T-SCAN•BK],

: Push

[V/MHz•SCAN],

[TONE•T-SCAN•BK],

[LOW•DUP]

[MONI•DTMF•EMR] to exit set mode.

: Push [TONE•T-SCAN•BK], [LOW•DUP] or

[MONI•DTMF•EMR] to exit call sign set

mode.

[LOW•DUP] or [MONI•DTMF•EMR] to exit

message set mode.

[M/CALL•PRIO],

Table of Contents