Attaching And Detaching A Lens - Canon MARK II EOS 5D Instruction Manual

Attaching and Detaching a Lens

Attaching a Lens
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
The camera cannot be used with EF-S lenses.
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
Remove the caps.
1
Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.
Attach the lens.
2
Align the red dots on the lens and
camera and turn the lens as shown by
the arrow until it snaps in place.
On the lens, set the focus mode
3
switch to <AF> (autofocus).
If it is set to <MF> (manual focus),
autofocus will not operate.
Remove the front lens cap.
4
31