Lcd Panel - Canon MARK II EOS 5D Instruction Manual

Nomenclature

LCD Panel

Shutter speed
Busy (buSY)
Image-recording quality (p.54)
37
Large/Fine
38
Large/Normal
47
Medium/Fine
48
Medium/Normal
67
Small/Fine
68
Small/Normal
1 RAW
D Small RAW
White balance (p.65)
Q Auto
W Daylight
E Shade
R Cloudy
Y Tungsten light
U White
fluorescent light
I Flash
O Custom
P Color
temperature
Battery check (p.28)
Exposure level indicator
Exposure compensation
amount (p.96)
AEB range (p.97)
Flash exposure compensation
amount (p.103)
Card writing status
Metering mode (p.95)
q Evaluative metering
w Partial metering
r Spot metering
e Center-weighted average metering
The display will show only the settings currently applied.
18
AF point selection ([ - - - ])
Card full warning (FuLL CF)
Card error warning (Err CF)
No card warning (no CF)
Error code (Err)
Cleaning image sensor (CLn)
Aperture
Shots remaining
Shots remaining
during WB bracketing
Self-timer countdown
Bulb exposure time
Drive mode (p.85)
u Single shooting
i Continuous shooting
10-sec. self-timer/
Remote control
k
2-sec. self-timer/
Remote control
<h> AEB (p.97)
Flash exposure
compensation (p.103)
ISO speed (p.57)
<0> Monochrome shooting (p.60)
<g> ISO speed (p.57)
<A> Highlight tone priority (p.177)
- - -
- - -
White balance
correction (p.68)
AF mode (p.78)
X
One-Shot AF
9
AI Focus AF
Z
AI Servo AF