Step 5 Radio And System Connection; Step 6 The Remote Control - Panasonic SC-HT920 Operating Instructions Manual

5
STEP Radio and system connection
System cable
≥Connect the AC power supply cord after all other connections are complete.
≥Optional antenna connections (‹ page 23).
FM indoor antenna
Adhesive tape
Affix this end of the antenna
where reception is best.
Main unit
OPTICAL
FM ANT
h
IN VCR TV
(75 )
LINE
AUDIO AUDIO
AUX
OUT
IN IN
AM ANT L
A
LOOP
R
EXT
Catch up
To disconnect
Press the catch
and pull out.
Conserving power
The main unit consumes a small amount of power, even when it is turned off (approx. 0.5 W). To save power when the unit is not to be used
for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the unit.
6
STEP The remote control
Remote control
2
Insert so the poles (i and j) match those
in the remote control.
3
R6/LR6, AA, UM-3
AM loop antenna
AM loop antenna
Stand the antenna up on
its base. Place the
antenna where
reception is best.
Keep loose antenna
cable away from other
wires and cables.
Click!
COMPONENT VIDEO OUT
(480P/480I)
P Y
B
S-VIDEO
OUT
1
P
R VIDEO
OUT
2
System cable
Batteries
≥Do not use
1
rechargeable type
batteries.
FM indoor antenna
Subwoofer
To disconnect
Press the catch
and pull out.
Catch up
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
∫ Use
Aim at the sensor (‹ page 10), avoiding obstacles, at a maximum
range of 7 m (23 feet) directly in front of the unit.
AC power supply cord
AC power
supply cord
To household AC outlet
(AC 120 V, 60 Hz)
RQT7696
9