Setting The Date And Time - Canon EOS-5D Instruction Manual

Setting the Date and Time

3
Set the date and time as shown below.
Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure you set the date and time correctly.
40
Select [Date/Time].
1
Turn the <5> dial to select [c Date/
Time], then press <0>.
The date/time screen will appear.
Set the date and time.
2
Pressing the <0> button toggles the
orange box between
With the
<5> dial to select the date or time to
be corrected, then press <0>.
With the
<5> dial to select the correct
numeral, then press <0>.
Confirm the setting.
3
With the
<5> dial to select [OK], then press
<0>.
The date/time will be set and the
menu will reappear. The minute that
was set will then start from 0 sec.
and
box displayed, turn the
box displayed, turn the
box displayed, turn the
.