Shooting Settings - Canon EOS-5D Instruction Manual

Register Camera SettingsN
3
Most of the current camera settings can be set under the Mode Dial's <l>
setting. Set the shooting mode to any mode except <1> (Full Auto). The
camera settings cannot be registered in the <1> (Full Auto) mode.

Shooting settings

Shooting mode and settings, AF mode, AF point selection, Metering
mode, ISO speed, Drive mode, Exposure compensation, Flash exposure
compensation, White balance
Menu settings
Quality, Beep, Shoot w/o card, AEB, WB SHIFT/BKT, Custom WB, Color
temp., Color space, Picture Style, Review time, AF points, Histogram, Auto
power off, Auto rotate, LCD brightness, File numbering (method), Custom
Functions (C.Fn)
Even when the Mode Dial is set to the <l> setting, you can still change the
drive mode and menu settings. If you want to include those changes under
the <l> setting, just follow the above procedure.
To view the settings registered under the <l> setting, set the Mode Dial
to the <l> setting and press the <B> button. The registered
settings will be displayed on the LCD monitor.
To revert the <l> setting to the default, select [Clear registered
camera set.] with step 2 explained on page 150. The settings will be
reset to the settings shown on page 37.
148
Select [Register camera settings].
1
Turn the <5> dial to select [c
Register camera settings], then
press <0>.
Select [OK].
2
Turn the <5> dial to select [OK],
then press <0>.
The following camera settings will be
registered under the Mode Dial's
<l> setting: