Table of Contents
Advertisement
Press the
button.
n
7.
Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Note: Always set a cooking time for each step in the series of
operations.
Press the
2
button.
1.
The button lights up. "SeriesOperations 1" appears in the
display as the heading.
Select and set the desired operating mode.
2.
Press the
2
button again in order to select the second
3.
operation in the series.
Time-setting options
You can call up the time-setting options menu by pressing
the
0
button. The following functions are available:
If the oven is switched off:
Setting the timer
■
Setting the clock
■
If the oven is switched on:
Setting the timer
■
Setting the cooking time
■
14
button.
0
Changing the cooking time
Press the
button and turn the rotary selector to change the
0
cooking time. Press the
0
Opening the oven door during cooking
Operation is suspended. The oven is paused. The
flashes on the status bar. Close the door and press the
button again. The programme will then continue.
Pausing operation
Press the
button briefly. The oven is paused. Press the
n
button again to continue operation.
Cancelling operation
Press and hold the
button until the intervention display
n
appears. You can now change the settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Select and set the desired operating mode.
4.
Press the
2
button again in order to select the third
5.
operation in the series.
Select and set the desired operating mode.
6.
Press the
button.
n
7.
Appliance operation begins.
Note: The first operation in the series is shown in the display.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
Changing the setting
Note: Changes can only be made before operation begins.
Press the
2
button until operation 1, 2 or 3 in the series
1.
appears in the displays
Set the desired operation in the series with the rotary
2.
selector.
Press the
button.
n
3.
Appliance operation begins.
Cancelling operation
Press and hold the
n
button until the intervention display
appears. You can now change the settings.
Setting a later end time
■
Setting the cooking time
If you set the cooking time for your meal, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Note: You can only set hours and minutes.
Example in diagram: Top/bottom heating, 180 °C, 45 minutes
button.
n
button.
0
symbol
n
n
Advertisement
Table of Contents
