Suitable Microwave Power Settings; Setting A Combination; Series Of Operations; Ovenware - Bosch HBC86K7 3S Series Instruction Manual

Suitable microwave power settings

Except for 900 watts, you can combine any microwave power
setting with a heating type.

Setting a combination

Example in diagram: Top/bottom heating setting 200 °C and
microwave setting 360 W, 17 minutes.
!
Press the button.
1.
"Types of heating" appears as the heading. 3D hot air and
160 °C are suggested in the display.
Turn the rotary selector to set the desired type of heating.
2.
7\SHV RI KHDWLQJ
7RS
ERWWRP KHDWLQJ

ƒ&

  
 
X
3. Press the button to switch to the temperature.
Use the rotary selector to change the temperature.
4.
7\SHV RI KHDWLQJ
7RS
ERWWRP KHDWLQJ

ƒ&

  
 
5. Press the button for the microwave power setting you require.
The selected button lights up. The heading changes to
"Combination".
&RPELQDWLRQ
7RSERWWRP
KHDWLQJ

ƒ&

  
  PLQ VHF

Series of operations

You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.

Ovenware

Always use microwave-safe, heat-resistant ovenware.

Setting a series of operations

Note: Always set a cooking time for each step in the series of
operations.
12
Set the cooking time using the rotary selector.
6.
&RPELQDWLRQ
7RSERWWRP
KHDWLQJ

ƒ&

  
  PLQ VHF
n
Press the button.
7.
7RSERWWRP
KHDWLQJ


ƒ&


  
  

Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished

sounding by pressing the

Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to

change the temperature or grill setting.
Changing the cooking time
0
Press the button and turn the rotary selector to change the
cooking time. Press the
Opening the oven door during cooking
Operation is suspended. The oven is paused. The

flashes on the status bar. Close the door and press the
button again. The programme will then continue.

Pausing operation
n
Press the button briefly. The oven is paused. Press the

button again to continue operation.
Cancelling operation
Press and hold the
appears. You can now change the settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
2
1. Press the button.
The button lights up. "SeriesOperations 1" appears in the
display as the heading.
6HULHV2SHUDWLRQV 


PLW
Select and set the desired operating mode.
2.
0
button.
0
button.
n
button until the intervention display
VFKOLH‰HQ






n
n
symbol
n