Table of Contents
Advertisement
Overview
This guide describes the external I/O specifications for the CW-C6000 Series/CW-C6500 Series. Please develop
your device to match these specifications.
Functionality
Using the external I/O signal allows the user to perform synchronous control of the printer and external devices
and to check the printer status.
Signal transmission between the printer and external device uses a D-Sub 25 cable.
Also, use a USB cable or Ethernet cable to send commands, which set the operation for the external I/O, from
the host PC.
System structure
A system using the external I/O can be structured as follows.
External I/O (D-Sub25 pin)
Input signal
(Control of the printer)
Output signal
(Check the printer status)
Synchronize
USB or Ethernet (Used to transmit commands)
Chapter 1 Overview
1
External device
9
Advertisement
Table of Contents
