Canon EOS 400D Digital Instruction Manual page 70

f: Changing the Depth of Field
Using the Built-in Flash
The flash exposure will be set automatically to match the aperture that
was set. The shutter speed will set automatically between 30 sec. - 1/
200 sec. to suit the scene's brightness.
In low light, the main subject is exposed with the automatic flash, and
the background is exposed with a slow shutter speed set automatically.
Both the subject and background look properly exposed (automatic
slow-speed flash sync). If you are handholding the camera, keep it
steady to prevent camera shake. Using a tripod is recommended.
To prevent slow-speed sync, access the [b Custom Function
(C.Fn)] menu's [Flash sync. speed in Av mode] (p.104) and set it to
[1/200sec. (fixed)].
Depth-of-Field PreviewN
When you want to see the effect of the current depth of field, select the
lowest aperture value and while holding down the depth-of-field preview
button, look at the viewfinder. Then turn the <6> dial to the right to set a
higher aperture value and see how the depth of field changes.
70
Press the depth-of-field preview button
to stop down to the current aperture
setting. You can check the depth of field
(range of acceptable focus) through the
viewfinder.