Using a Household Power Outlet
With AC Adapter Kit ACK-DC20 (optional), you can connect the camera
to a household power outlet and not worry about the battery level.
Do not connect or disconnect the power cord while the camera's power
switch is set to <
154
Connect the power cord.
1
Connect the DC Coupler DR-700.
2
Insert the DC Coupler.
3
Push in the DC cord.
4
>.
1
Connect the power cord as shown in
the illustration.
When you are finished, disconnect
the plug from the power outlet.
Connect the cord's plug to the DC
Coupler DR-700.
DC Coupler DR-20 is cannot be used
with this camera.
Open the cover and insert the DC
Coupler until it locks in place.
Open the DC cord cover and install
the cord as shown.
Close the cover.