Selecting All Images - Canon EOS 400D Digital Instruction Manual

3 Print Ordering

Selecting All Images

The print order can also be set or canceled for all the images in the CF
card. For standard-type prints, a quantity of one will be ordered for all
the images.
Note that after following the "Selecting Individual Images" procedure, if
you do the "Selecting All Images" procedure, the print order will change
to "All images."
Note that RAW images cannot be selected for printing even when you
set "Mark all."
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the selected images might
not be printed.
148
Select [All].
1
Press the <U> key to select [All],
then press <0>.
The All screen will appear.
Select [Mark all].
2
Select [Mark all], then press <0>.
One print each will be specified for all
the images, then the Print order
screen will reappear.
If you select [Clear all], all the images
selected for printing will be
deselected.
Exit the menu.
3
On the Print order screen, press the
<7> button.
The image selections will be saved to
the CF card, and the menu will
reappear.