Specifications; Technical Specifications; Databus Introduction And User Policy - Furuno FI-3005 Operator's Manual

4

Specifications

4.1

Technical specifications

Dimensions:
Instrument cable:
Power supply:
Power
consumption at 12V:
Temperature range:
Weight:
Enclousure:
CE approval
The products conforms to the EMC requirements for immunity and emission according
to EN 50 08-1.
4.2 FI-30 databus introduction and user policy
Introduction:
The FI-30 data bus is a multi talker multi receiver data bus specially designed for
marine navigation applications. It utilises the RS485 standard with up to 32 senders
and/or receivers to form a Local Area Network. Data is transmitted synchronously with
1 start-bit, 8-data-bits, 1 parity-bit, two stop-bits in 9600 baud.
User policy:
The FI-30 data bus is open for new users and applications without the a licence or a
licence fee. The data bus is, however, the property of the manufacturer, which means
the specification must be followed in order to protect the manufacturer's commitments
to the FI-30 data bus performance and safety.
For most PC-applications, the full duplex interface, will be a very useful tool for
monitoring real time data, to edit and store waypoints to PC-file or to Server. The
interface is supplied with a cable for connection from PC to the Server or FI-30
instruments. A 9-pole D-sub connector is connected to the RS232 port on the PC.
Server: 110 x 165 x 30 mm. (4.3x6.5x1.2 inch)
8 m (26 ft).
12V DC (10-16V). The instruments are polarity protected
Server: 0.2W.
Storage:-30°to +80°C (-22°to +176°F)
Operation: -10° to +70°C(14°to +158°F)
220 gram. (7.76 oz).
Splash proof
28