Receive Nmea Sentences In To Server - Furuno FI-3005 Operator's Manual

2.11.3 Receive NMEA sentences IN to Server

There are 6 different main types of NMEA sentences:
1) Position related data: Position, SOG/COG, time, and a limited amount of satellite
status if a GPS is connected.
2) Navigation data: (BTW), (DTW), (BOD), (XTE), (SET) and (DRIFT).
The Server will automatically send data to the Nexus Network. E.g.: (DRIFT), (WCV),
(TTG) and (CTS).
3) Speed data: is read only if (C73 BSP) is set to (ON). See Multi Control Manual
4) Depth data: is read only if (C74 DEP) is set to (ON). See Multi Control Manual
5) Compass data: is read only if (C75 CMP) is set to (ON). Heading is either (HDT)
(priority) or (HDM). Magnetic variation (from Nexus Network) is added to (HDM) but not
to (HDT). See Multi Control Manual
6) Wind data: angle and wind speed is read from (MWV) data, only if (C76 WND) is
set to (ON). True wind angle and wind speed is calculated by FI-30, when the boat
speed (the speed of the water) is known.
The following NMEA sentences can be received IN to Server:
Autopilot sentence "A"
APA
Autopilot sentence "B"
APB
Bearing original destination
BOD
Bearing and distance to waypoint
BWC
Bearing and distance to waypoint (old)
BWR
Depth measured from the transducer position
DBT
Depth
DPT
Global positions fix data (GPS)
GGA
Geographic position, Latitude/Longitude
GLL
DOP and active satellites
GSA
Satellites in view
GSV
Heading, magnetic
HDM
Heading, true
HDT
Water temperature
MTW
Minimum navigation information
RMB
Minimum specific GPS/transit data
RMC
Waypoint closure velocity
WCV
Set & drift
VDR
Water speed and heading
VHW
Wind speed and direction
MWV
Course Over Ground and Ground Speed
VTG
Cross-track-error, measured
XTE
Time & date
ZDA
Target boat speed
TBS
Custom angular data
CAD
Custom fix data
CFD
Rudder Sensor Angle
RSA
21