Installing The Transducers; Connecting Optional Accessories - Furuno FI-3005 Operator's Manual

When all connections are made, use the cable straps as required. Mount the Server
cover using the 2 mounting screws.
Your Server installation is done!
2.3

Installing the transducers

Log, depth, wind and compass transducers are all connected to the pins on the right
hand side of the Server. They are all clearly colour coded and marked with numbers
and names. Install the transducers according to the separate instructions supplied with
each transducer. Connect as per below drawings
2.4

Connecting optional accessories

These optional accessories are available from your local FURUNO Dealer. (For a more
complete list of accessories available, see 4.3).
10