Table of Contents
Advertisement
366 Wheels and tyres
Position of jack support points
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at
the appropriate jacking point of the vehicle,
the jack could tip with the vehicle raised.
Only position the jack at the appropri‐
#
ate jacking point of the vehicle. The
base of the jack must be positioned
vertically under the jacking point of the
vehicle.
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet out of the tyre-change tool
#
kit and place it on the hexagon nut of the
jack so that the letters "AUF" are visible.
Position support
2
of jack
#
port point 1.
Turn ratchet
3
clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the
ground.
Turn ratchet
3
until the tyre is raised a max‐
#
imum of 3 cm from the ground.
Loosen and remove the wheel (
#
4
on jack sup‐
2
1
and
page 367).
/
Advertisement
Table of Contents
