Table of Contents
Advertisement
Slide cover
2
of positive clamp
#
jump-starting connection point in the direc‐
tion of the arrow.
Starting assistance
Connect positive contact
3
#
to the positive terminal of the donor battery
using the jump lead. Always begin with posi‐
tive clamp
3
on your own vehicle first.
Start the engine of the donor vehicle and run
#
it at idling speed.
Connect the negative terminal of the donor
#
battery to earth point
using the jump lead. Begin with the donor
battery first.
Start the engine of your own vehicle.
#
Let the engines run for several minutes.
#
Before disconnecting the jump leads, switch
#
on an electrical consumer in your own vehi‐
cle, e.g. the rear window heater or the light‐
ing.
When the starting assistance procedure is com‐
plete:
3
on the
First, remove the jump leads from earth point
#
4
and the negative terminal of the donor
battery, then from positive contact
the positive terminal of the donor battery.
Begin each time with the contacts on your
on your vehicle
own vehicle first.
After removing the jump leads, close cover
#
2
of positive contact 3.
Close cover 1.
#
Further information can be obtained at a quali‐
fied specialist workshop.
Charging
4
of your vehicle
#
#
#
When the charging process is complete:
#
3
and
#
#
Further information can be obtained at a quali‐
fied specialist workshop.
Breakdown assistance 345
Connect positive contact
3
of the vehicle to
the positive terminal of the charger using the
charging cable. Always begin with positive
contact
3
of the vehicle.
Connect the negative terminal of the charger
and earth point
4
on the vehicle with the
charging cable. Start with the charger.
Start the charging process.
First, remove the charging cable from earth
point
4
and the negative terminal of the
charger, then from positive contact
the positive terminal of the charger. Begin
each time with the contacts of the vehicle.
After removing the charging cable, close
cover
2
of positive contact 3.
Close cover 1.
3
and
Advertisement
Table of Contents
