Default - First Alert DWH-47 User Manual

Security Code
Set up your security code to limit who can have access to the system from a remote location. The default
is 123456. Note: A Security Code must be entered to gain remote access.
1. Tap the SECURITY CODE icon to display the Security
Code screen. If you have previously entered a code,
the screen will display your current code otherwise
the factory default code is shown.
2. Tap on the Change Code field. A keyboard screen
displays. Enter your new Security Code.
3. Tap OK and the System Restart message appears
briefly then returns to the NETWORK SETUP screen.
You must turn your DVR off then back on for the
security code change to take effect.
4. Tap to return to the previous screen
REMOTE ACCESS
SECURITY CODE
Internet Setup - DHCP
Keyboard for Data Entry
Restart Message
Page 31
6