Checking the Connectivity
1. Click [Start] -> [Control Panel].
2. Double-click the [PRISM Settings] icon. [PRISM Wireless Setting] appears.
3. Check the connectivity on the [Link] tab. The current condition of connection is
displayed.
Item
State
Current Channel
Current Tx Rate
Radio Off/Radio
On
Rescan
Throughput
(Bytes/sec)
Link Quality
Signal Strength
Shows the current condition of connection.
The MAC address of the other computer that you are connected
to is displayed, when the connection is successfully made. If you
are connected to more than one computer, the computer that has
the best connectivity is displayed.
Shows the current channel used for the connection.
Shows the current transfer rate in Mbits/sec.
Click [Radio OFF] to disconnect.
Click [Radio On] to connect to the network.
Click this button to search for others to connect to.
Shows the actual transfer rate of the transfer data for send (Tx)
and receive (Rx).
Shows the link quality. This is not shown for the AdHoc connec-
tion.
Shows the signal strength.
This is not shown for the AdHoc connection.
Table A-11 Checking connectivity
U s i n g t h e W i r e l e s s L A N
Description
10
87