Before Using This Device - Fujitsu Stylistic LT 800P User Manual

Before Using This Device

Thank you for purchasing a Fujitsu LT800P tablet with the optional Integrated Wireless
LAN. This manual describes the basic operating procedures for the Wireless LAN
(referred to as the "device" in this manual) and how to set up a wireless LAN network.
Before using this device, read this manual carefully to ensure correct operation of the
device. Keep this manual in a safe place for reference while using the device.
Characteristics of the Device
This device consists of a wireless LAN card that is attached to the computer via a
mini-PCI slot.
The main characteristics are as follows:
It uses the power saving communications system in the 2.4 GHz band, and does not
require any license for radio communication.
It uses Direct Sequence Spread Spectrum (DS-SS), which is resistant to noise.
This device complies with Wi-Fi, and is able to communicate at the maximum transfer
rate of 11 Mbps.
The maximum communication range is approximately 120 feet (36.5 meters) inside a
building. The range may be shorter depending upon the installation factors, such as
walls and columns.
Unauthorized access can be prevented with the use of SSID and encryption key.
Wireless LAN Modes Using this Device
AdHoc Mode
The "AdHoc Mode" refers to the network connecting two computers using wireless LAN
cards. This connection is called an "AdHoc network."
Using an AdHoc network, you can obtain a network connection easily and at a low cost.
In the AdHoc mode, you can use the function supported by Microsoft Network, such as
File and Print Sharing to exchange files and share a printer or other peripheral devices.
To use the AdHoc Mode, you must set the same SSID and the same encryption key for all
the computers that are connected. All connected computers can communicate with each
other within the communication range.
U s i n g t h e W i r e l e s s L A N
2
2
2
2
69